Forklift Fork

Forklift Forks - There are two main styles of forklift forks: the hook type and the pin type. Shaft mounted or also known as pin type, are typically used in bigger forklifts. This particular style utilizes the fork shaft or pin so as to connect onto the lift truck. On top of the blade there is an eye which the pin can slide through. This would secure the forks to the carriage. Hook type blades are often found on forklifts up to 14,000 lbs capacity. Hook types are name because they hook over and lock into the bars on the fork carriage. These forks can be effortlessly installed by means of sliding upper and lower hooks onto the end of the carriage bars. One more assembly alternative is using a special blade loading notch in the middle of the lower carriage mounting bar.

There are industry standards for sizes of the forks. blades are load rated according to both thickness and width. Once forks need to be replaced, it is critical to make sure that the newer fork is rated the same as the older blades it's replacing. This tine rating would be stamped on the shank of the blade.

Making use of forklifts can really minimize labour and time in many industrial applications. Having the suitable forks installed on the machine will improve efficiency and safety.

There are many types of blades, so determining the suitable ones is quite vital. Non-palletized material will need sharp ended blades so as to slide below the materials and palletized materials can be securely moved using blunt-end style forks. Check with your instructor or manager in order to know the proper blades used for the workplace application.

Every forklift has its' own design and right method to change the forks therefore refer to the instruction booklet for your specific unit. Determine whether or not your model has quick-change blades. Numerous newer models have this fork style so as to make changing forks an easier job to accomplish in less time. Consult the manufacturer's directions to detach the blades accordingly. Nearly all quick-change blades drop mechanically. Ensure the side shifters are positioned in the correct place so the new attachment or blades fit correctly on the forklift. Connect the lifting attachment or forks in accordance to the lift truck's instructions. Check the instruction manual if needed and as soon as they are secured, perform a safety check prior to loading the new forks for the first time.

Click to Download the pdf

Forklift Parts

Carriage Mounted Spreader Bar

Carriage Mounted Spreader Bars - As the name implies, this particular mast comprises 3 sections. The outer part mounts securely to the lift truck. The next intermediate section telescopes inside of the outer part. The inmost section telescopes inside of the intermediate part. The inner section and the intermediate part both raise as the lift cylinders lengthen. Once again in...

More

---

Forklift Forks

Forklift Forks - Whenever machine parts wear out they need to be changed. A company can save considerable amounts of money each and every time they supplant just the part that gets old rather than replacing the entire piece of equipment. Further savings are accessible usually whenever replacing parts, there's the option to acquire used parts as opposed to new...

More

---

Fork Mounted Truss Booms

Fork Mounted Truss Boom - An adjustable forklift boom is a really valuable part of equipment intended for businesses that need to transfer heavy things all over. The forklift itself is a really vital piece of machinery which is basically a small truck outfitted together with 2 prongs that are power operated on the front. These prongs can be slid...

More

---

Container Forklift Parts

Container Forklift Parts - The forklift is a useful piece of industrial machinery utilized in different industrial applications in order to transport and store materials and items. Their innovative designs allow them to work and move in tight or confined areas. The typical function of a lift truck is to transport heavy load in the unloading and loading of merchandise,...

More

---

Drive Unit for Forklift

Forklift Drive Unit - Instead of a transmission, a hydraulic pump is powered by the lift truck motor. Hydraulic power from the pump is supplied to hydraulic drive motors that are attached to all the drive wheels in order to provide power to the forklift.

More

---

Simultaneous Fork Positioners

Simultaneous Fork Positioner - Forklift Truck Load Protectors reduce pricey marring, scuffing, chipping and scratching by means of providing a padded non-slip surface between product and steel tine. These accessories are molded from premium polyurethane according to OEM specifications. It is really fast to mount the Load Protectors because they fit right over the typical lift truck blades with mounting...

More

---

Lull Telehandler Part

Lull Telehandler Parts - Telehandlers by Lull have been supplying load placement precision since the year 1959. The Lull telehandler can really help make the work easier and faster, whether the task entails positioning heavy steel, landing loads on scaffolding or transferring loads. These units are available with the patented Stabil-Trak stability system to be able to ensure operator confidence....

More

---

Electric Boom Lift Attachment

Electric Boom Lift Attachments - Type "E" forklifts meet the least standards for fire and electrical hazards. This is the most common label used for electric lift trucks. Forklifts described as type "E" cannot be used in dangerous areas. Type "ES" trucks meet all the standards of Type "E" lift trucks and have other equipment in order to avoid the...

More

---